Results 1 to 4 of 4

Thread: jrsc intall ( check light)

  1. #1
    Inactive Member morepoop4u's Avatar
    Join Date
    February 25th, 2002
    Posts
    47
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Unhappy

    well i'm getting the cel light for the IAT and the IACV but i swear the connections are good. on the IAT i did have to lengthen the green wire with a different gauge wire because thats all i had (18 gauge vs the 20 stock), i think. could i be dropping voltage. also does it matter which order you connect the red wire with the yellow stripe on the jr fuel enrichment relay that connects to the IAT and the ecu. also the idle is pretty bad. it fluctuates from 1000rpm to 250rpm and then dies if i don't give it some gas. can anyone give me some tips or tricks to fix this.
    this is my setup:
    99gsr 6psi jrsc, I,H,cat,E and hondata 2b with a base map.

  2. #2
    Inactive Member klintman's Avatar
    Join Date
    August 21st, 2001
    Posts
    319
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    most likley it is the iacv or iat . from what your symptoms are im thinking its the iacv . recheck the connections / resolder or solder them if you havent (i whish i had the first time) . if this isnt a remedy check that the sensors themselves are ok .

  3. #3
    Senior Hostboard Member JRCivic's Avatar
    Join Date
    January 13th, 2000
    Posts
    3,835
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Also check to make sure that you do not have them plugged into the wrong sensor.

  4. #4
    Inactive Member CKim's Avatar
    Join Date
    September 12th, 2001
    Posts
    197
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I agree on checking to make sure that they're not plugged in wrong. I swapped mine once and I had some funky idling too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •